1
2
19
05/2020
TYPICAL RK70 CORDLESS ROUND KNIFE
04. MAINTENANCE
01.
REPLACE THE KNIFE
WARNING
Danger of cutting. Turn the tool of before replacing the knife.
Avoid contact with knifes edge during when replacing the knife.
Make sure the knife is properly secured before operating the tool again.
WARNING
Danger of burns. Knives can heat up during operation. Let the tool cool down
before replacing the knife.
01. Insert the locking pin (shipped in the knife set) into the knife‘s locking hole
2
.
02. Loosen the knife cap
1
with a special wrench.
03. Remove the locking pin again.
04. Remove the knife cap and knife.
05. Place the new knife with it‘s flat, labeled surface facing the tool.
06. Insert the locking pin.
07. Put the knife cap back in place and tighten it to secure the knife.
