10
05/2020
TYPICAL RK70 CORDLESS ROUND KNIFE
01. PREFACE
06.
TRANSPORT - PACKAGING - DISPOSAL - STORAGE |
FIRST COMMISSIONING / DECOMMISSIONING
FIRST COMMISSIONING
01. Clean the product thoroughy before first use.
02. Please check if the tool or electrical cables are damaged.
03. Have specialists confirm that you are allowed to operate the equipment with the
mains voltage at your facility and that it is correctly set up.
04. Make sure the guard is properly in place.
NOTE!
1.) Should the product deviate from its intended condition,
DO NOT
use it!
2.) Only connect the machine to a grounded power outlet!
DECOMMISSIONING
01. Engage the lock switch.
02. Remove the battery.
03. Disconnect the charger from the power supply.
04. Clean the tool if necessary.
05. Store safely in accordance with the provisions in this manual and workplace safety regulations.
TRANSPORT - PACKAGING - DISPOSAL - STORAGE
01.
Transport
All equipment is delivered packaged.
Checked product for damages after delivery.
The manufacturer assumes no liability for subsequent damages
incurred in the customers care.
Make sure that the product is transported safely and with care at your facility.
02.
Packaging
The packaging must be disposed of in accordance with local environmental
protection regulations.
03.
Disposal
The customer is responsible for proper disposal. Disposal must comply with
local environmental regulations.
NOTE!
Parts contaminated with lubricants or oils must be disposed of separately.
04.
Storage
When not in use for extended periods of time, equipment must be protected
against dirt, moisture and corrosion (e.g.: by an oil film).
