VETRA
Systems Corporation 275-J Marcus Blvd., Hauppauge, NY 11788 USA
Tel: 631-434-3185 Fax: 631-434-3516
www.vetra.com e-mail: [email protected]
2
3. Connect the Power Unit to the Multiplexer:
The Splitter/Multiplexer is powered by an external wall plug-in supply the VIP-210 (+5Vdc 2 A reg. 110 – 240 Vac 50 – 60 Hz).
First plug the power output plug of the external power supply into the mating jack on the backpanel of the Splitter/Multiplexer
marked “+5VDC IN”, and only then plug the supply into a suitable AC source. It is recommended that the external power
supply be connected to an AC power source that has a power on/off switch.
OPERATION
1. Power Up Sequence
The Splitter/Multiplexer or the PC may be powered up in any order. The PC may be powered down at any time. There is no
separate power control for the Multiplexer. The Multiplexer is on when the external plug-in supply unit is connected and
powered.
When the Splitter/Multiplexer is powered up, you may observe random selection of the “ACTIVE STATION” leds on the front
panel of the Splitter/Multiplexer for several seconds. This is normal. The Splitter/ Multiplexer is initializing each of the input
devices. The order and final selected station depends on the response time of each device.
2. Workstation Selection
To switch from one Workstation to another there must be a 3 - 5 second delay between keyboard and or mouse inputs from
one Workstation before the Multiplexer recognizes keyboard and/or mouse inputs of the next Workstation. Note that the front
panel "ACTIVE STATION" leds of the Multiplexer will switch to the Workstation currently being used.
3. Lock and Release
Any Workstation has the option of locking out the other Workstations for uninterrupted input to the PC. To accomplish this the
user must first be the current ACTIVE STATION, then by pressing and releasing the
Left Shift
key
three
times he will lock out
the other Workstation’s (keyboard and mouse), but the monitor(s) will be viewing the same image(s). To release this feature
the same Workstation that activated the lock out must press and release the
Right Shift
key
three
times. This will set the
Multiplexer back to the 3 - 5 second delay between Workstations.
SPECIFICATIONS
Model Number
Height
Width
Depth
Weight
VIP-884-KM
2.63" (6.68 cm)
8.08" (20.52 cm)
6.32" (16.05 cm)
1 lb. 5 oz.
VIP-884-KMV
2.63" (6.68 cm)
8.08" (20.52 cm)
6.32" (16.05 cm)
1 lb. 8 oz.
VIP-884-KMV2
3.38" (8.59 cm)
8.08" (20.52 cm)
6.32" (16.05 cm)
1 lb. 15 oz.
Environmental
Operating Temp:
5 to 104 deg. F (-15 - 40 deg. C)
Storage Temp:
-4 to 122 deg. F (-20 - 50 deg. C)
Supported Hardware
Computer:
IBM PC/AT, PS/2 and 100% compatibles
Video
Monitors:
VGA,
SVGA
Maximum Resolution:
up to 1600 x 1200 to 75 Hz
Peripherals:
AT and PS/2 keyboards, PS/2 mouse, IntelliMouse (PS/2 only)
PARTS LIST
Model Number
VIP-300-6MM-06
Ext. Cable
VIP-302-VGA-06
VGA Ext. Cable
VIP-210
Power Supply
VIP-884-KM
2 0 1
VIP-884-KMV
2 1 1
VIP-884-KMV2
2 2 1
MegaMux is a trademark of Vetra Systems Corporation Copyright © 1995 – 2003 by Vetra Systems Corporation All Rights Reserved