UNITS CONVERSION TABLE
1 KPH
0.6222
1
0.54
54.69
0.2778
1
1.6071
0.8679
87.89
0.4464
MPH
KPH
KNT
FPM
MPS
1 FPM
0.00508
0.01138
0.01829
0.00987
1
1 MPS
196.87
1.944
3.6
2.24
1
1 KNT
1.1523
1.8519
1
101.27
0.5144
8
To replace the impeller, use a small
screwdriver to loosen the set-screw
found on the back of the windmeter.
Then remove the impeller by twisting the
impeller assembly clockwise (if you are
facing the back of the windmeter) to the
"
O
" position marked on the rear of the
rear of the meter.
Install a new impeller by following these
instructions in reverse.
3.
O
L
O L
VANE REPLACEMENT
NOTE:
The anemometer is very accurate
at low and mid-range air speeds.
Constant use at very high speeds, such
as measurements out a fast-moving car
window may damage the impeller's
bearing and reduce over-all accuracy.
1 MPH