background image

SPECIAL

 

SAFETY

 

INSTRUCTIONS

 

for

 

V20L3AP0K1

 

Portable

 

Inflator

o

Inspect the Inflator before each use and do not use if any of the components are wet or damaged.

o

Ensure that the inflator nozzle is fully engaged and in the locked position before starting the tool. An
unsecured air nozzle could result in personal injury or damage to property.

o

Take care to review the maximum recommended air pressure of the object being inflated, and do not
exceed the recommended air pressure. Overinflation can result in catastrophic failure of the object being
inflated and could result in serious injury or death.

o

Do not use the tire inflator on high pressure tires such as those used on commercial vehicles, agricultural or
specialist vehicles.

o

Do not kink or block the air hose while the tire inflator is working.

o

Do not use the tire inflator when the vehicle is moving.

o

The tire inflator is not designed for continuous use. Operation over an extended period of time will
overheat and damage the tire inflator. It should not be used continuously for more than 30 minutes. After
10 minutes, turn it off and let it cool for 15 minutes before resuming operation.

o

If the tire inflator is making an abnormal sound, or the temperature of the unit is too high, turn the power
off immediately and let it cool for at least 30 minutes before resuming operation.

o

Do not leave the tire inflator unattended when operating and keep out of the reach of children.

o

When not in use store the tire inflator in a cool, dry and dust free environment in the box.

o

Do not place the tire inflator on or near sources of direct heat or in locations where it will be exposed to
direct sunlight for prolonged periods of me.

o

Do not operate the tire inflator in or around flammable environments.

o

Only use the adapters supplied with the tire inflator.

o

The Tire inflator is not waterproof.

o

Ensure cables and hoses connected to the Tire inflator do not interfere in the safe opera on of your vehicle.

o

Never put the connector and adaptors into your mouth, ear or eye, they are not toys.

o

The inflator contains no user serviceable parts – Do not open.

o

For your own safety be sure to follow the instructions carefully when using the Tire inflator. Misuse of the
inflator could lead to injury.

o

No alterations should be made to the Tire inflator, attachments or adaptors supplied by the manufacturer.

o

Improper use of the inflator can cause damage to property and possibly harm the user. When using the
Digital Tire inflator ensure the vehicle is parked in a safe location where your personal safety is not at risk.

o

Before inflating a tire mounted to a car, truck or other vehicle, ensure that the vehicle is incapable of
movement. The use of the parking brake and wheel chock blocks is highly recommended.

o

Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean clothes to remove dirt, carbon
dust, etc. Ensure the Tire inflator is clear of any dust or other debris before connection.

Summary of Contents for 20V Max V20L3AP0K1











Reviews: