Vetek X Series, Operating Instruction, Page: 7 / 80

- 7 -
The balance with Φ 85 mm pan:
- open side doors of weighing chamber,
- inside the chamber place lower shield of
weighing chamber(4),
- put centering ring on the shield (3),
- put the balance pan inside the ring (2),
- put the anti-breeze shield on the
centering ring (1),
− close side doors of weighing
chamber,
− turn on balance supply,
− pin of power adaptor should be
connected to socket in the back
of balance casing.
The balance with pipettes calibration set:
- slide chamber side doors off (8)
- inside the chamber put bottom ring
(8),
-
put glass ring on bottom ring (7),
-
replace pan inside glass ring (6),
- put upper ring on glass ring (5),
- put steam protection container on
upper ring (4),
- put container to pipettes calibration
inside the container (3),
- put glass pad on upper ring (2),
- put glass lid on glass pad (1).
Draw. 1.The components installation for the XA/X balances