Vetek X Series, Operating Instruction, Page: 6 / 80

- 6 -
*
- when any problems with electrostatics occurs humidity of air should be increased to 50%, but when it is not possible to keep 50%
humidity the ionizer should be used to eliminate electrostatic effects on balance indications.
Dimensions:
2. UNWRAPING THE BALANCE
2.1. The balance XA/X
Cut safety tape off. Take balance off the box. Take all necessary to correct
performance of balance elements off the box. After replace balance in place of use put
scale and rest of elements on. The balance is supplied with 230 V AC / 11V AC
supplier.
The balance with Φ 100 mm pan:
-
open side doors of weighing chamber,
-
inside the chamber place lower shield of
weighing chamber (3),
- inside the chamber place anti-breeze
shield (2),
- put the balance pan inside the ring (1),
− close side doors of weighing
chamber,
−
turn on balance supply,
− pin of power adaptor should be
connected to socket in the back
of balance casing.