user manual
www.vetek.com
8
7. TECHnICAL PARAMETERS
8. CARE AnD MAInTEnAnCE
8.1.
To make sure the scale in good maintenance and avoid using it in dust and trembling
environment and put it under level state.
8.2.
When weighing, put the load in the center of the scale as far as possible.
8.3.
Don’t wash the scale with corrosive impregnate.
8.4.
The weight of the load should be less than the Max. Ca9d( dis division value). If it exceeds
the overload warning value, the indicate will display *
and the scale will give out a buzz
sound.
8.5.
Don’t put the heavy load on scale for a long time and don’t shock the platform with heavy load,
or the load cell may be damaged.
8.6.
Be sure to insert the adapter to a quality power source. 8.7. When the scale doesn’t respond cut
off all the power (AC and DC) first, then connect power on it again.
8.8.
When there is a malfunction, please cut off the power immediately and pull out the plug.
8.9.
Without authorization, never try to disassemble or repair the scales. Send it to the service agent
in local area or contact us immediately.
The calibration and simple rectifying methods are not open to users. For details, please contact
our sales agent in your country. Forbid to change the setting data of trading scale without the
permission of the law !
WTC 6/SW
WTC 15/SW
WTC 30/SW
Capacity Max
6 kg
15kg
30kg
Readability
2g
5g
10g
Tare range
-6kg
-15kg
-30kg
Pan
250 x 300 mm
Operating temp.
+5°C ␣ +35°C
Power supply
230V AC / 9V DC and accumulator
Display
LCD × 3 pcs.
WTC 6/S
WTC 15/S
WTC 30/S
Capacity Max
6 kg
15kg
30kg
Readability
2g
5g
10g
Tare range
-6kg
-15kg
-30kg
Pan
250 x 300 mm
Operating temp.
+5°C ␣ +35°C
Power supply
230V AC / 9V DC and accumulator
Display
LCD × 3 pcs.