1
THIS EQUIPMENT CONTAINS NO USER SERVICEABLE COMPONENTS.
-
Servicing of the equipment must only be carried out by trained and authorized per-
sonnel.
-
Use only the AC adapter supplied with the scale. Other adapters may cause dam-
age.
Routine maintenance
-
Harsh abrasives, solvents, scouring cleaners and alkaline cleaning solutions should
not be used; especially on the display window.
-
The outside of the product may be wiped down with a clean cloth, moistened with
water containing a small amount of soap.
-
The display unit can be washed down with water.
“CE” logo here somewhere…
Installation
1. Unpack display unit and both weigh beams
2.
Set weigh beams on
a flat and level surface. A concrete slab is recommended.
3. The beams feature adjustable feet at each end. This enables side-to-side and front-to-back
adjustment when setting up the system.
4. Install cattle chute or temporary platform
5. Install indicator in a suitable viewing area using mounting bracket
NOTES:
-
The indicator comes with a pre-installed rechargeable battery
-
The weigh beams come with pre-installed “C” cell alkaline batteries
-
Do not mix the type of batteries. Replace all batteries at the same time.
-
If the scale is not to be used for a long period of time, remove all batteries from the battery compart-
ment to avoid leakage which may cause damage to the instrument.
-
To extend the life of your digital scale, do not drop items to be weighed onto the platform or overload
the scale beyond its rated capacity. Shock-loading and overloading may damage the load cell and
void the warranty.
-
Be sure that the feet are not screwed all the way into the bar, as this will result in inaccurate
weighing
-
Never weld any installation attached to the weigh beams. Damage to the scale’s electronics
can result
-
When placing the weigh beams under a cattle squeeze chute, locate the bars at the far
ends (front & back) of the squeeze chute in order to minimize the risk of tipping when ani-
mals enter and exit the chute
-
Be sure that no equipment or objects prevent downward movement of the weigh beams.
-
Be sure that the set up does not rock from corner to corner.
