page 8
Instruction for handling Weighingblock VB2-10K
This instruction is for the user of the Force Meter. It is the last site in the complete manual. Hopefully is this the only
needed information. For complete information, contact you wholesaler, Vetek AB or download it from our web site
http://www.vetek.net
LCD
Enunciator
MEANING
0
Better known as the “Center of Zero” enunciator, this light is active
whenever the displayed weight is within ± 0.25 divisions of true zero.
N
Indicates that the indicator is displaying net weight/force.
G
Indicates that the indicator is displaying gross weight/force.
T
Indicates that a tare weight/force has been established in the system.
Lb/kg
Indicates the unit of the displayed weight/force (normally disabled).
bAtt
Indicates a low battery condition. Replace the alkaline battery.
Indicates stable weighing.
VB2 Enunciator Definitions
Shown above is the LCD display. Before reading the value the stable indicator must be ”on”.
If not wait a few seconds until it appears.
Handling
1. Press
ON
to start the Force Meter.
2. If necessary, press
ZERO
to obtain a weight/force reading of zero.
3. Press
OFF
to switch off the Force Meter. Hold 3 seconds.
4. The Force Meter switches off automatically after 20 minutes when not in use
Force measuring.
1. Unload Force Meter and press
ZERO
.
2. Place the object on the Force Meter’s platter and allow the force indication to stabilize. If the item force exceeds the
Force Meter’s capacity, it displays “
”. Press
TARE
to zero the Force Meter. The display shows zero force
and turns the NET enunciator on.
3.
NET/GROSS
toggles between Gross and Net weight/force display only if a Tare has been established.
General advice
When the Force Meter is not in use and is transported between different working places we recommend to use a case or any
other protection against vibrations and other hard environmental conditions. Protect the Force Meter with a transparent
plastic bag if there is any risk of leakage or when working in a wet environment.
ON
NET
GROSS
OFF
ZERO
TARE
O
Hantverksvägen 15, 76493 Väddö Sweden
Tel +46 176 208 920
info@vetek.
com
www.vetek.
com
