page 1
Hantverksvägen 15, 76493 Väddö Sweden
Tel +46 176 208 920
info@vetek.
com
www.vetek.
com
Manual Force Meter Weighingblock VB2-10K
Note:
-
At last page in this manual you will find a short form instruction. Normally the only
instruction shipped together with the Force Meter.
Alkaline battery 9 V
Calibration switch
The Weighingblock is a robust Force Meter. It is
designed for portable use. When transported by car
between different working places we recommend
using of a protected space or a case. This will extend
the interval for service.
ON
NET
GROSS
OFF
ZERO
TARE
O
9VDC jack
(2,1mm center
minus)
Manual_VB2-10K_V1
