Vetek Weighing AB
www.vetek.com
JWL Service Manual
May not be reproduced in any form without written permission
PAGE
27
That is the commonly used 9 female ~25male RS232 connecting wire. You have to
exchange by yourself the pin 2 with the pin 3 at one end of the wire bought.
Note: The hollow dots represent that the connectors are male and the black dots, female.
8-3-3 Warning light connection for use
■
Parameter setting of beeps for weight check:
(1). In weighing mode, press
for
about
3s
or
press
and release it when
the scale is turned on.
will first appear and then a
parameter value such as
”
” and also an auxiliary sign
.
(2). Use
or
to
select a parameter item such as
PO1. Press
or
to
select the parameter value, with
four modes
/
/
/
for
selection.