user manual
www.vetek.com
2
auTo SHuT oFF MoDe
STATE
DESCRIPTION
TIME FOR SHUT OFF
NOTE
low battery indication
30 seconds
eeproM error
30 seconds
EEEEE
overload
30 seconds
ErrH
Zero value higher
30 seconds
Zero value lower
30 seconds
Zero Tracking
according to time of shut off
Negativ vikt
Display of weighing in minus value according to time of shut off
Samma viktvärde
Display of weighing in same value according to time of shut off Inclusion zero tracking
and minus weight
Olika viktvärden
Display of weighing in diff. value
no off
Inclusion minus weight
14. Two calibration weight units : kg / lb
15. Open calibration weight
16. Power on zero-setting range: + 10%
17. Zero range: + 4% of full capacity
18. Three modes : Normal mode / Setting mode /Internal Auto Calibration mode
19. RS232 function
BeSKrIVnInG aV TanGenTern
HOLD BMI
UNIT
WEIGHT
ZERO
TARE
1. HOLD/BMI:
a. press this key to store weight value.
B. To release Hold feature, press the HolD key again.
c. To release Hold feature and tare the weight, press the Tare key.
D. press and hold this key, the scale will enter to BMI setting.
2. UNIT/WEIGHT:
a. Välj viktenhet: kg eller lb.
B. Sist använda viktenhet visas nästa gång enheten startas.
3. ZERO:
a. When there’s load on the scale , press this key to return to zero
.B. put a container on the scale, press this key to tare the weight, and the tarred value is stored..
4. TARE:
a. When there’s load on the scale , press this key to return to zero.
B. put a container on the scale, press this key to tare the weight, and the tarred value is stored.
5. STRÖMBRYTARE:
When the scale is in use or not in use, please turn the power on or the power off.
