background image

manual

www.vetek.

com 

info@vetek.

com

2

SaFETY PRECaUTIONS

all safety messages are identified by the words “WaRNINg” and “CaUTION”. These words mean 

the following: WaRNINg Important information to alert you to a situation that might cause serious 

injury and damage to your property if instructions are not followed.
Use only the correct aC adaptor with the scale. Other adaptors may cause permanent electrical 

damage. 

CaUTION

Important information that tells how to prevent damage to the equipment.

When using the scale, the following safety precautions should always be followed.

Avoid placing the scale in direct sunlight, this may cause discoloration or malfunction.

Replace all batteries at the same time – Do not replace only a portion of the 6 batteries as

this may cause a malfunction.

If the scale is not to be used for a long period of time, remove all batteries from the battery

compartment to avoid leakage, which may cause damage to this scale.

Avoid overloading the scale, as this may cause permanent damage and void your warranty

– do not EVER exceed the maximum capacity of the scale

Keep the scale away from water – this scale is not water resistant. Shock, injury and

electrical damage can occur if used in a wet location!

Matter charged with static electricity could affect accuracy. Discharge all static electricity.

For example, one method is to use Static-guard spray, and spray it on both sides of the

weighing platform.

Summary of Contents for FCS Series






Reviews: