12
ANALOG OUTPUT MODIFICATION
-
Remove the jumper E1 to obtain an analog output of 0 - 10 Vdc ( output on terminals 22 - 23 ).
-
Remove the jumper E1 to obtain an analog output of 0 - 20 mA ( output on terminals 21 - 23 ).
-
Close the jumper E1 to obtain an analog output of 4 - 20 mA ( output on terminals 21 - 23 ).
-
To increase the tare suppression over 17mV put a resistance of 10K (1/8 of Watt) instead of R33
(normally is 22 k).
- To have an analogue output with 35 mV in input one must enter a 49,9K resistance (1% precision and
temperature precision of 15 ppm) in parallel to R11.