3
6. Press “HOLD”, the display will show a “ ” pointing to the “HOLD”. The reading will hold for 10
seconds then turns to the weighting mode, and the “ ” will disappear.
7. When you read when measuring the length of a baby, it should be the right reading plus the left
reading. See picture 4.
Operation message
1. The display will be “EEEE” when the weighting something heavier than 20.09kg.
2. When the voltage is lower than 3.0V, it will shows
, then you should change the battery in
time. When the voltage is lower than 2.7V, it will shows “LO” and turn off automatically.
3. If it shows
【
OUL2
】
, it means that there is some tares, you should put away the thing on it, if there is
nothing, you should change the sensor.
4. If the weight is steady of unload for 3 minutes, the scale will turn off automatically.
The attached is the adjusting method for the errors during weighting. See picture 5.
Picture 1 Fix part of the measuring board
