HD453 GB Issue 08
7
Incorrect or incomplete assembly may allow oxygen gas to escape and create a fire hazard.
The security of the animal chamber is dependent on the correct and complete use of all
components and fasteners.
5.1
Assemble the cabinet using the tools and fasteners provided. Follow the diagrams. Do not over-
tighten fasteners.
5.2
The door is hinged at the left as supplied but may be reversed to provide better access if required.
Fit the top hinge socket to the cabinet using the M5 x 16mm countersunk screws, M5 flat washers
and M5 dome nuts.
5.3
5.4
Place the door in the lower hinge and close the latch. Lower the top cabinet down onto the other
parts.
5.5
Fit the M4 x 30mm cap-headed screws, star washers and do nuts into each set of holes around the
edge of the cabinet. Tighten enough to prevent them spinning. This creates an air tight seal around
the cabinet. Fit the nebuliser bracket as shown.
1
2
3
4
5
6
7
8