Vestil PLC-P-FM, Instruction Manual

Page: 1 / 7

Table of Contents Rev. 10/22/2018 PLC-P-FM, MANUAL
Table of Contents Copyright 2017 Vestil Manufacturing Corp. 1 of 7
PLC-P-FM Manual Pail Lid Closing Press
Instruction Manual
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at
http://www.vestilmfg.com/parts_info.htm .
Vestil Manufacturing Co.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Specifications……………….....…………………..…………………………………………………………….. 2
Signal Words….………..…...…………………………………………………………………………………… 3
Hazards of Improper Use…………..…………………………………………………………………………… 3
Record of Normal Condition……………………………………………………………………………………. 3
FIG. 1A: PLC-P-FM exploded view and bill of materials……………………………………………..……… 4
FIG. 1B: Adjust pail stops………………………………………................................................................... 4
Pail height adjustment…………………………………………………………..………………………………. 5
FIG. 2: Height adjustment diagram………………………………………………………………..…………… 5
Use instructions………………………………………………………………………………...………………… 5
FIG. 3: Center pail beneath platen………………………………………………………………………...…… 5
FIG. 4: Adjust burper plunger assembly………………………………………………………………..……… 5
Inspections & Maintenance………………………………………………………………………………...…… 6
Labeling diagram…………..…...…………………….………………………………………………………….. 6
Limited warranty…...…………………………………………………………………………………………….. 7