background image

Rev. 4/17/2015 

   PLBS, MANUAL.doc 

                             Copyright 2014 Vestil Manufacturing Corp.                      

Page 1 of 5 

 

 

 
 

 

                 

 

 

PLBS-S

ERIES 

W

HEELED

,

 

S

TEEL 

P

RY 

B

ARS

 

I

NSTRUCTION 

M

ANUAL

 

 

 

 
 

Receiving instructions:

  

After delivery, IMMEDIATELY remove the packaging from the carpet pole in a manner that preserves the 
packaging and maintains the orientation of the product in the packaging; then inspect the product closely 
to determine whether it sustained damage during transport. 

If damage is discovered during the 

inspection, immediately record a complete description of the damage on the bill of lading

. If the 

product is undamaged, discard the packaging.

 

 

NOTES:

 

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where 
the product is 

used

 is exclusively the responsibility of the owner/end-user.

 

 

2) VESTIL is 

not liable

 for any injury or property damage that occurs as a consequence of failing to apply either:  

a) Instructions in this manual; or b) information provided on labels affixed to the product. 

 

 
 

V

ESTIL 

M

ANUFACTURING 

C

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

www.vestilmfg.com

    e-mail: 

[email protected]

 

 

Table of Contents: 

Hazard Identification: Explanation of Signal Words….……………………………………………………………..………… 2  
Safety Recommendations………………………………………………………………..…………………………..…….……. 2  
Product Specifications…………………………………..…………………………………………………………..…….……… 2 
FIG. 1: PLB/S exploded parts diagram & bill of materials………...………………………………………………………….. 3 
Use instructions………………………………………………….……………………………………………….…………….. ... 3 
Inspections………………………………………………………………………………………………………………………… 3  
Maintenance……………………………………………………………………………………………………………………..… 4 
Label Placement Diagram……...……………………………………………………………………………………………..…. 4 
Limited Warranty…...…………………………………………………………………………………………………………..…. 5 

Summary of Contents for PLBS Series






Reviews: