Rev. 11/12/2018
OCC-2, MANUAL
Copyright 2017 Vestil Manufacturing Corp
3 of 7
Signal Words:
T
his manual uses SIGNAL WORDS to indicate the likelihood that a particular action will cause
personal injuries or property damage. Signal words also specify the level of seriousness of injury if the
product is misused in the ways described. The following signal words are used in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
Hazards of Improper Use
:
Vestil strives to identify foreseeable hazards associated with the use of its products. However,
no manual can address every conceivable risk. The end-user ultimately is responsible for
exercising sound judgment at all times.
Improper or careless use of this product could result in serious personal injuries or
death.
•
Read the entire manual before installing, using, or servicing this product
. Read the manual to
refresh your understanding of proper use and maintenance procedures whenever necessary.
•
Never exceed the 200 lb. capacity (90.9kg).
•
Inspect the carrier at least 1 time per month as described in
DO NOT use it unless it is in normal condition. See
Whenever repairs are necessary, ONLY use manufacturer-approved replacement parts.
•
DO NOT use the carrier to transport any cylinder that does not properly fit in the clamp. The
clamp accommodates cylinders that are 8.5” to 12.5” in diameter. Adjust the width of the clamp to
match the diameter of the cylinder as described in step 4 of
•
DO NOT remove or obscure any label. All labels must be readable and undamaged. See
•
DO NOT modify the carrier in any way. Unapproved modifications automatically void the
(see p. 7) and might make the unit unsafe to use.
Proper maintenance is essential for this product to remain in
long as possible.
o
Keep the product clean & dry.
o
Repair regions where the finish is damaged with touchup paint.
o
Make sure that anchor bolts are always tightly fastened to the wall.
