Vestil FLB-D Series, Instruction Manual

Page: 6 / 7

Table of Contents Rev. 9/14/2020 FLB MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 6 of 7
DO NOT return the lifter to service until all necessary adjustments and repairs are complete. An
adjustment is a simple correction that restores the beam to SATISFACTORY CONDITION , such as
tightening loose fasteners or removing debris from surfaces. Repair means removal of worn parts and
installation of replacement parts. A “modification” is a change that alters the beam from original
condition, like bending the structural members or removing parts. NEVER modify the beam without the
express, written approval of Vestil. Modifications might make the beam unsafe to use and
automatically void the LIMITED WARRANTY .
Step 5: Make a dated record of all repairs, adjustments, and replacements performed
.
LABELING DIAGRAM
The unit should be labeled as shown in the diagram. However, label content and locations are
subject to change so your product might not be labeled exactly as shown. Replace all labels that are
damaged, missing, or not easily readable (e.g. faded). To order replacement labels, contact the
TECHNICAL SERVICE AND PARTS DEPARTMENT online at http://www.vestilmfg.com/parts_info.htm .
Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking
the operator to connect you to the Parts Department
675
1000
218
1049
WARNING