Rev. 0913
CART-
110
0-SS, manual.doc
Page
1
of
15
CART-550-SS & CART-1100-SS
Instruction Manual
After delivery, immediately remove the packaging from the product in a manner that preserves the packaging
and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport.
If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading
. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is
used
is exclusively the responsibility of the owner/end-user.
2)
The manufacturer
is
not liable
for any injury or property damage that occurs as a consequence of failing to apply
a) the i
nstructions m
anual; or b) information provided on labels affixed to the product. Neither is
the
responsibl
e
manufacturer
for
any
consequential damages sustained as a result of failing to exercise
sound judgment while assembling, installing, using or maintaining this product.
Table of Contents
Page
Hazard Identification: explanation of signal words……………………………………………………………………. 2
Safety Guidelines….……………………………………………………………………………………………………… 2
Product Introduction……………………………………………………………………………………………………… 3
Bills of materials for CART-550-SS and 1100-SS…………………………………………………………………….. 5, 7
Assembly Instructions……………………………………………………………………………………………………. 8
Use Instructions…………………………………………………………………………………………………………... 9-11
Loading…………………………………………………………………………………………………………………..... 9
Lift Table Operation……………………………………………………………………………………………………… 10
Hydraulic System Operation……………………………………………………………………………………………. 10-11
Inspections & Maintenance……………………………………………………………………………………………… 12
Troubleshooting…………………………………………………………………………………………………………... 13
Table of Figures
FIG. 1: CART-550-SS Exploded Parts Diagram……………………………………………………………………… 4
FIG. 2: CART-1100-SS Exploded Parts Diagram…………………………………………………………………….. 6
FIG. 3: Hydraulics Diagram……………………………………………………………………………………………… 8
FIG. 4: Spline and Pin Connection……………………………………………………………………………………… 8
FIG. 5: Handle Insertion…………………………………………………………………………………………………. 8
FIG. 6: Pedal Attachment……………………………………………………………………………………………….. 8
FIG. 7A & 7B: Proper Load Positioning (Top View & Side View)…………………………………………………… 9
FIG. 8: Caster Brake Lever……………………………………………………………………………………………… 10
FIG. 9: Hydraulic Control Pedal Positions……………………………………………………………………………... 11
FIG. 10: Maintenance Prop Installation………………………………………………………………………………… 12
FIG. 11: Label Placement……………………………………………………………………………………………….. 14
