18
Electrical connection diagram
be connected. Connect one end to the junction box and connect the other end to the
hobs power connection box which is located at the back of the hob. Remove the
cover of the power connection box and install the cable, in accordance with the
connection diagram.
The power supply cable must be positioned away from direct heat sources. It should
not be subjected to a temperature rise of more than 50
0
C above room temperature.
This appliance conforms with the following EU Directives:
·
73/23/EEC dated 19.02.1973 Low Voltage Directive
·
89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive
92/31/EEC
·
93/68/EEC dated 22.07.1993 CE Marking Directive
·
EEC/89/109 relating to contact with foods
3x2.5mm² 220V~
3x2.5mm² 230V~
3x2.5mm² 240V~
5x1.5mm² 380V,3N~
5x1.5mm² 400V,3N~
5x1.5mm² 415V,3N~
4x2.5mm² 380V,2N~
4x2.5mm² 400V,2N~
4x2.5mm² 415V,2N~
For the induction hob, the cable must be
H05VV-F
3x2.5 mm² / 4x2.5 mm² / 5x1.5 mm²
60227 IEC 53.
You will find the connection diagram shown on the bottom of your appliance.
