7
OPERATION OF THE APPLIANCE
Use the induction cooking zones with suitable cookware.
After mains voltage is applied, all displays are come on for a moment. When this
time is over, the hob is in the
stand-by mode
and it is ready for operation.
The hob is controlled with electronic sensors which are operated by touching the
related sensors. Each sensor activation is followed by a sound signal (
buzzer
).
Switching the appliance on:
Switch the hob on by touching
ON/OFF
key . All heater displays show a static
0
and the bottom right dots blink. (If no cooking-zone is selected within 20
seconds, the hob will automatically turn off.)
Switching the appliance off:
Switch the hob off at any time by touching .
ON/OFF
key has always priority in the switch off function.
Switching the cooking-zones on:
Touch the
heater selection
key you wish to cook on.Than you can adjust the
setting with the Plus/Minus key.The corresponding 7 segment display
is brighter and the decimal dot shows the selected cooking zone.
The element is now ready to cook on. For quickest boil times, select
9
and then
adjust down to a lower setting as required.
Switching the cooking-zones off:
Select the element you want to switch off by pressing the
heater selection
key.
Using key, turn the temperature down to
0
.
If the cooking zone is hot,
H
will be displayed instead of
0
.
+ /
