VESTEL VHDA55CS, Operating Instructions Manual, Page: 50 / 108

VESTEL VHDA55CS-VHDA80CS 50 |
7 Troubleshooting
7.1 Problem finding
• Only a qualified electrician may carry out any electrical repairs. All local
regulations must be followed. Contact the manufacturer in case of any
doubts.
• Unplug all power connections before opening the appliance.
Error Cause Solution
The light can be
switched on but the
motor does not work Fan switch turned off Put the on/off switch in the
“I” or “II” position
Fan switch broken Contact service centre
Motor broken Contact service centre
Both the light and
motor do not work Fuse is broken Reset/Replace fuse
Power supply loose or
disconnected Connect power supply to
wall socket
Oil is leaking The one-way valve and
the exhaust pipe are not
tightly sealed Disassemble the one-way
valve and seal with sealant
There is leakage between
section and cover Disassemble the section and
seal with sealant
The light is not working The lamp is broken Replace the lamp (see 7.2
Replacing the lamp)
There is insufficient
suction power/air is not
taken up adequately The distance between
the cooker hood and the
cooking appliance is too
large Make sure the distance
between the cooker hood
and the cooking appliance
does not exceed 70 - 80cm
The cooker hood is no
longer in a horizontal
position The screws or not tight
enough Tighten the screws and level
the cooker in a horizontal
position