22
Changing the LED lamp
WARNING:
LED lamp should not be
changed by the user.
If the light bulb is damaged, please contact
the Customer Communication Centre. Fol-
lowing steps can be followed for changing
the LED lamp:
• Remove the power plug from the mains
socket.
• Remove the cover of the lamp from its
right and left hand side using a screwd-
river by pressing down.
• Change the LED lamp and guide it to
its place correctly.
J
J
Troubleshooting
When you notice an abnormal situation
in your appliance, you may attempt to
troubleshoot according to the following
descriptions. If your appliance still does
not operate properly, contact Vestel Call
Centre. You may access the authorized
services list and contact information from
the web site.
PROBLEM
CAUSE
SOLUTION
Appliance is not
operating.
There may be a power failure.
Contact with an expert electric tech-
nician.
Power plug may not be properly
connected.
Plug it firmly to the outlet.
Check if the fuse of the socket to
which the plug is connected or the
main fuse is blown.
Make sure that the fuse is operational.
Ambient temperature is too low.
Set the compartment temperature to
a lower level.
There might be a problem with the
power outlet.
To check this, plug your refrigerator
to a socket which is surely operating
and try again.
Freezer compartment may be in
automatic defrosting process.
It will get back to normal after the
defrosting process. This is normal.
Compressor may not work when it
is first started as a protection.
It will get back to normal after a while
the appliance is switched on. This is
normal.
