English - 2
English - 3
EVC TESTER USAGE DURING INSTALLATION for EVC04
Please follow the steps in the installation guideline provided in the product package. Before turning on the
power to the EV Charger, Connect console cable of the EVC tester to the console port of the EV Charger as
shown in figure.2.
Figure.2
1.
Console cable is connected to the console port of the EV Charger.
2.
Console connection should be done to an isolated source.
3.
The connection in primer part can done by authorized service person.
WARNING
•
Tester should be used in EVC device which has suitable MCB connection in line.
•
L1,L2,L3,N sockets should only be used for voltage controls. External load connection should not be done.
•
Tester should be used by an authorized service person.