English - 8
English - 9
EV CHARGER HEALTH CHECK
You can turn on console logs bu pressing “Log On“ button.
Be sure to turn off the logs from “Log OFF“ button before
leaving the charging station after commissioning.
To turn on the OCCP logs, please press “OCPP Log On“ button.
Be sure to turn off the OCPP logs from “OCPP Log OFF“ button
before leaving the charging station after commissioning.
Please be sure that to activate Info Errors and send
email buttons OCPP Log On should be selected.
To display the total charging time, the total consumed power
and charge count of the charging station, press “Info“ b
To display the logged errors of the charging station, press
“Errors“ button.
To send the data complied in the terminal display to the e-mail
address set in the “Settings“ menu, press “Send Logs“ button.
Abbreviations
PS : Meaning of Ps is pilot state and value of PS changes according to EVC CP voltage.
A1 : Pilot State Unplugged - No Cable
A2 : Pilot State Unplugged PWM
B1 : Pilot State Unplugged in - Vehicle connected
B2 : Pilot State Ready - Vehicle connected and ready to charge
C1 : Pilot State EV Ready - Vehicle connected and ready to charge
C2 : Pilot State Charging - Charging
D1-D2 : Pilot State Ventilation
EE - Error State
E : This output describes the error of EVC. All errors have a special number and error number can be matched
from list below. You can check troubleshooting section for solving the error conditions.
0: No Error
1: PowerOutageOrShortError
2: PilotDiodeError
3: UndefinedStateError
4: UndefinedCableCurrentError
5: ContactorWelded