English - 80 -
Options
menu. The following options are
available.
Select Channel:
Using this option, you can
switch to the selected channel.
Set Timer on Event / Delete Timer on
Event:
After you have selected an event in
the EPG menu, press the
OK
button. Select
Set Timer on Event
option and press the
OK
button. You can set a timer for future events.
To cancel an already set timer, highlight that
event and press the
OK
button. Then select
Delete Timer
on Event
option. The timer will
be cancelled.
NOTES:
You cannot switch to any other
channel while there is an active timer on the
current channel.
It is not possible to set timer for two or more
individual events at the same time interval.
Advanced EPG and Extended
Programme Info Banner
If your TV is connected to a network the
Advanced EPG screen will be displayed by
pressing the
Epg
button on the remote. In this
advanced mode of EPG application all the
informations about the events are collected
from the internet database.
You can navigate through the application
using the coloured buttons via the defined
short-cuts for each. Follow the on-screen
instructions.
Extended Info Banner
A network connection is also needed to
access extended info banner. Press the
Info
button on the remote twice to open the
extended Info bar. Using left or right buttons
you can see the previous or next events of the
channel being watched. Informations such as
event type, channel name etc. can be seen on
the info banner.
Teletext Services
Press the
Text
button to enter. Press again
to activate mix mode, which allows you to
see the teletext page and the TV broadcast
at the same time. Press once more to exit. If
available, sections in the teletext pages will
become colour-coded and can be selected
by pressing the coloured buttons. Follow the
instructions displayed on the screen.
Digital Teletext
Press the
Text
button to view digital teletext
information. Operate it with the coloured
buttons, cursor buttons and the
OK
button.
The operation method may differ depending
on the contents of the digital teletext. Follow
the instructions displayed on the digital
teletext screen. When the
Text
button is
pressed again, the TV returns to television
broadcast.
Software Upgrade
Your TV is capable of finding and updating
the firmware automatically via the broadcast
signal or via Internet.
Software upgrade search via user
interface
On the main menu select
System>Settings
and then
More
. Navigate to
Software
upgrade
and press the
OK
button. In
Upgrade options
menu select
Scan for
upgrade
and press
OK
button to check for
a new software upgrade.
If a new upgrade is found, it starts
to download the upgrade. After the
download is completed confirm the
question asking about rebooting the TV
by pressing the
OK
to continue with the
reboot operation.
Summary of Contents for 55UA8300
Page 1: ...TELEViZYON KULLANIM KILAVUZU 4K SMART 55UA8300 55 LED TV OPERATING INSTRUCTIONS...
Page 108: ...English 106 iOS ANDROID...
Page 109: ......
Page 110: ......
