English
- 50 -
DLNA
DLNA support is only available in the Media Browser
folder mode. To enable folder mode, go to the
Settings
tab in the main media browser screen and press
OK
. In
the settings options, highlight
View
Style
and change to
Folder
using the
Left
or
Right
buttons. Select the desired
media type and press
OK.
If sharing configurations are set properly, an OSD
message will be displayed after selecting the desired
media type. Select
OK
to display the selected network
or USB memory content. If you want to refresh the
device list, press the
GREEN
button. You can press
MENU
to exit.
If available networks are found, they will be listed on
this screen. Select media server or network that you
want to connect to using the “ ” or “ ” buttons and
press
OK
.
If you select the media type as
Video
and choose a
device from the selection menu, a new menu screen
will appear on the screen
.
Select
Videos
from this screen to list all the available
video files from the selected network.
To play other media types from this screen, you must
go back to main Media Browser screen and select the
media type as desired and then perform the network
selection again. Refer to the Media Browser USB
Playback section for further information on file playback.
Subtitle files do not work if you watch videos from your
network through DLNA.
You can connect only one television with DLNA to
the same network. If a problem occurs with the DLNA
network, please switch your television off at the wall
socket and back on again. Trick mode and jump are
not supported with the DLNA function.
Note:
There may be some PC’s which may not be able
to utilize the DLNA function due to administrator and
security settings (such as business PC’s).
For best home network streaming with this TV, the
Nero software should be installed.
Internet Portal
Ensure the TV is connected to a Wired/Wireless
Internet connection. After the connection is
established, you can select or view portal options.
Note:
A Broadband internet connection is required
for high quality viewing. Ensure that the internet
connection is made properly. You must set the
Country and Language data correctly in the First
Time Installation for the proper operation of the
internet portal.
Press “ ” button on your remote control and the
portal application options will be displayed in a
manner similar to the template below.
Note on PIP Window
If you switch to portal mode while watching TV
channels, current programme will be displayed on
the PIP window. You can change channels using
P+/P-
buttons.
Current HDMI content will be displayed on the PIP
window, if you switch to portal mode while watching
HDMI source.
Use the “ ” or “ ”, “ ” or “ ” to navigate between
the items on Portal screen. Press the
OK
button to
confirm your selection. Press the
BACK
button to go
to the previous screen.
Press the
EXIT
button to quit the Internet portal mode.
Note: Possible application dependent problems may
be caused by the content service provider.
SMART RECOMMENDATION
Smart Recommendation is an application, which
recommends to user TV programmes relevant to his
watching habits. The application collects data about
watched programmes to do this. This type of data
collection is subject to the approval of the user.
The application recommends TV programmes
according to one of the following options:
* Popular TV programmes
* Currently broadcasted programmes that are relevant
to the user’s watching habits
* Programmes relevant to the user’s watching habits,
that will be broadcasted any time during the day
Smart Recommendation application is availabe on
portal. Timer can be set for the selected programme.
Timer settings can be changed from Timers menu in
the TV Settings menu.
