3
15. Damage Requiring Service-Unplug this product
from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled or objects have fallen
into the product.
c. If the product has been exposed to rain or
water.
d. If the product dose not operate normally by
following the operating instructions. Adjust
only those controls that are coverd by the
operating instructions as an improper
adjustment of other, controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e. If the product has been dropped or cabinet has
been damaged.
f. When the product exhibits a distinct change in
performance this indicates need for service.
16. Replacement Parts-When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
or have the same characterristics as the original
parts. Unauthorized substitutions may result in
fire, electric shock or other hazards.
17. Safety Check-Upon completion of any service or
repairs to product, ask the service technician to
perfrom sefety checks to determine that the
product is in proper operating condition.
18. Carts and Stands-The appliance should be used
only with a cart stand that is recommended by
manufacturer.
19. An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
F E A T U R E S
●
60mm long faders are provided for 3 program
c h a n n e l s . M o r e s e n s i t i v e c o n t r o l c a n b e
achieved for Techno/Trance mixing.
●
Effect send switch is equipped on each input
channel for effect parformance. The effect send
and return level controls are provided in the
master section.
●
P.F.L. (pre fader listen) switch is provided for pre
fader monitoring.
●
The input levels are monitored by over load
indicator.
●
Four mic input levels are provided. The main mic
can be assigned to program channel 2 for full
control. The other tree mics are mixed with
individual level control, 2 band EQ, effect send
and P.F.L.
●
Ten segment LED level meter is provided for
careful level check.
●
The input faders can be replaced with the optional
rotary volume unit (DF-17). This option makes
the PMC-17A the perfect mixer for house music
mixing.
●
The detachable cross fader is provided for quick
maintenance.
●
A powerful 3 band EQ with +6/-24dB range is
provided along with the instant out switch on
each band. More sensitve and drastic control can
be achieved for Techno/Trans mixing.
