Vestax BDT-2500, Owner'S Manual

Page: 7 / 12

6
ASSEMBLY AND SET-UP
platter
platter
q
Place the turntable platter onto the center
spindle.
w
Pull the drive belt from the center ring on the
platter over the motor pulley. Be careful not to
twist the belt.
e
Rotate the platter by hand to ensure proper
seating of the belt.
r
Place the rubber mat on the platter.
t
Slide balanceweight onto rear of tonearm with
the number scale facing the cartridge end. Twist
lightly to screw into position.
y
Insert the headshell into front end of tonearm
and hold in place while the locking nut is
tightened. Please do not use too much force
when tightening.
u
Push the dust cover into the hinge assembly on
the rear of the turntable unit.
BDT2500/E 00.9.12 7:49 PM ページ 6