10
Adjustment of Anti-skating Control
PITCH CONTROL ADJUSTMENT
OPERATION
Exceeding stylus pressure recommendations
may couse skipping and/ or reduce stylus life.
Note
Use EP adaptor for EP playback.
Note
When operating in SP mode, the special
cartridge "VR-7SP" is recommended. Please
contact your nearest Vestax dealer for
availability.
Note
y
Rotate the balanceweight from zero to the
manufacture's recommended stylus pressure.
Set the anti-skating control knob to the same value as
recommended stylus pressure unless otherwise
specified.
q
Place a record on the rubber mat.
w
Turn power switch to "ON" position.
e
Remove stylus protector from cartridge.
r
Select appropriate rotation speed. (33/45rpm)
t
Push Start/Stop button to start rotation.
y
Carefully place tonearm on the record.
u
Replace tonearm to rest position after play has
finished.
i
Press Start/Stop button to stop rotation.
o
Turn power switch to "OFF" position.
The speed of the BDT-2500 is controlled by two
pitch control volumes.
MAIN PITCH is used for rough adjustment of pitch
from 16rpm-78rpm when 33 is selected
from 16rpm-98rpm when 45 is selected
FINE PITCH is used for a finer adjustment of pitch
from 24rpm-41rpm when 33 is selected
from 40rpm-51rpm when 45 is selected
SP OPERATION
q
Place SP record on the rubber mat.
w
Place the strobe sheet on the record.
e
Set the speed selector to 33 1/3rpm.
r
Turn MAIN PITCH to fully clockwise position.
t
Adjust FINE PITCH until 78rpm dots are stationary.
BDT2500/E 00.9.12 7:49 PM ページ 10
Summary of Contents for BDT-2500
Page 1: ...OWNER S MANUAL ...
Page 10: ......
