Configuration
4.7.5 Wind direction function
Global settings
Group
Group
selection.
Alias
Shows the alias of the current selected group.
Enabled
Enable or disable the wind direction function.
Wind protection
From
Set the start angle of the protected wind direction area.
Up to
Set the stop angle of the protected wind direction area.
Threshold
Set the wind speed threshold. The wind speed threshold must always be below the wind
speed threshold of the wind function.
Assigned sensors
Sensor
Gives a list of all possible sensors which can be assigned to this function. When moving
the cursor over the different sensor indexes, the alias will show the corresponding name
of that sensor. When assigning more than one sensor to this function, the highest meas-
ured value of the assigned sensors will be used.
Alias
When the cursor is on a sensor index, the alias shows the corresponding name of that
sensor, otherwise this will be blank.
Function
Active delay
Set the function active time in seconds. When during this time the function conditions
stay true (wind speed equal or more than the threshold level and wind direction inside
protected area), the function becomes active.
Inactive delay
Set the function inactive time in minutes. When during this time the function conditions
stay false (wind speed below threshold or wind direction outside protected area), the
function becomes inactive.
- 70 -
Picture 28: Menu wind direction function
The wind direction function will steer the sunshade
as function of the wind speed in combination with
the wind direction.
Summary of Contents for Vesta Building Controller
Page 2: ......
