Ar
t.-Nr
.:
84501110 E1 •
V
estamatic GmbH • Dohrw
eg 27 • D-41066 Mönchengladbach • www
.v
estamatic.com
Subject to modifications.
© by Vestamatic GmbH
IF SMI KNX
24VDC
Art.-no.:
01092510
Installation and Operating Instructions
IF SMI KNX 24VDC
Art.-no.: 01092510
Intelligent motor control for 8 SMI LoVo motors.
Option of connecting up to 8 SMI LoVo 24VDC motors to
control interior blinds and interior motors
Compatible with KNX BUS system
Programmable button and LED for addressing indication on the device
KNX objects, Up/Down, Step/Stop, shading position, automatic
Shutter height %, slat %, shutter height status %, slat status %
Store/Call up scene 1 + 2, drive status
Individual and group control via KNX output devices
(conform EIS7 Standard or DPT 1.007 and 1.008 described in KNX
System Specifications Interworking Datapoint Types)
Fully synchronised operation of shades also possible in parallel
connection
Short description
Technical data
1/ 15
G
Safety precautions
– Contact a professional electrician for installation.
– Check the control system for signs of mechanical damage after
unpacking. If you notice any shipping damage, do not start up
the control system and notify your supplier immediately.
– The control system should only be used for the purpose speci-
fied by the manufacturer (refer to the operating instructions).
Any changes or modifications thereof are not permissible and
will result in loss of all warranty claims.
– If the control unit cannot be operated without presenting a
hazard, it must be switched off and prevented from being
switched on unintentionally.
– Turn off the power supply and prevent it from being switched
on unintentionally before performing work on any windows,
control or sunshades driven by the control system.
Ä
Supply voltage:
24VDC
Housing:
REG 2TE
Interface for BUS system:
KNX, Medium TP1
Interface for motor:
SMI
Communication projects:
82
Max. number of group addresses:
114
Max. assignment of group addresses: 162
Operating temperature:
0 °C (32 °F) to +40 °C (104 °F)
Software class:
A
IP class:
IP 20
Degree of contamination:
2
Dimensions (L × W × D):
90 × 35 × 59 mm
Mark of conformity:
p
Notes for professional electricians
1. Connect the control in accordance with the wiring diagram.
2. Attach module on the top-hat rail and push until the module audibly clicks
into place on the mounting rail.
Installation
Wiring diagram
