16
Installation
DO NOT INSTALL THE RANGE HOOD BEFORE TESTING IT MECHANICAL DAMAGE.
MIGHT HAVE OCCURRED DURING TRANSPORTATION. Plug in the range hood to
the USA/Canada 120V standard outlet, test the blower and the lights before
Installations
(r
efer to Page 6
for par
ts):
Measure the distance between stove top and
the bottom of range hood. A distance of 28”
to 31” is recommended*.
Due to different ceiling height configurations,
recommended height may not be applicable.
.
NOTE: Use threaded drywall anchors only when mounting the hood on sheet
rock. Mounting the hood on wall studs or lumbars is highly recommended.
Figure 1
1
.
Using references in Height & Clearance on
Position two mounting screws on the wall,
8
.
07inchs distance
between of two screws.
2
.
Measure the width of the chimney then attach the chimney-mounting
brackets to the wall as high as you want the upper chimney to be.
Page 8, mark the leveling point of the hood.
3
.
Align hood-mounting holes to the screws on the wall and hook the hood into
place. Tighten screws to secure hood to the wall.
CAUTION: Make certain the range hood is secure before releasing!
4. Connect the venting duct between the hood and the exhaust opening either
on the ceiling or wall. Use silver tape or duct tape to make all joints secure
and air tight.
5. Connect the range hood to a designated standard outlet (please refer the
product label for the suitable voltage of this unit) or cut off the plug and
connect three wires (black, white and green) to house wires and cap with wire
connectors. Connect according to colors (i.e. black to black, white to white,
and green to green).
installing it.
Summary of Contents for Rome VRH-ROME-30SS
Page 1: ...Rome User Manual VRH ROME 30 36SS ...
Page 28: ...www vesta kitchen ...
