7
4. If the double stacked version is equipped with casters, a restraining device, which should be fixed
to the bottom appliance, must be installed to limit the movement of the appliance. See 5.3 for
installation.
CAUTION
:
– This product has two power supply cords. Connect each Power Supply Cord to a receptacle that is
connected to an individual branch circuit. Disconnected both cords before moving or servicing this
appliance.
–
Only FEC100D and FEC100D-L can be assembly into double stacked version.
5.5 Warnings
1. Always supervise the appliance while being used and never let it run while empty.
2. The appliances do not require special adjustment assistance from specialized personnel if the
adjustments are carried out by the user during the use of the appliance.
3. Use only the accessories recommended by the manufacturer.
4. During the initial uses of the appliance, an acrid or burning smell may be detected. This will
disappear after two or three uses.
5. After use, the areas are hot for a certain amount of time (residual heat). Avoid resting your hands
on them and allowing children to get too close.
6. These are very important regulations; if they are neglected, the appliance may not perform
properly or the user may be placed at risk.
7. The appliance is strictly for professional use and must be used by qualified personnel.
8. The installation, start-up and maintenance of the appliance must be carried out by qualified
personnel.
9. All installation works must be carried out according to the law in force. The manufacturer is not
responsible for damages due to an incorrect installation, bad maintenance or incorrect use.
6. Working Instructions & Operation Flow
6.1 Operating the Controls
A convection oven is a different type of oven that offers many features and advantages to the food
service operation. The additional capabilities and features of the oven require some learning. However,
the operation of the oven is not difficult to understand or control once you have some practice. See the
controls in the following feature: