background image

 

 

 

IMPORTANT SAFETY INFORMATION 

When using this electrical appliance, basic safety precautions 
should always be followed including: 
1.

 

Read and understand all instructions. 

2.

 

Operate the appliance indoors only on a dry, stable, hard 
surface. 

3.

 

Do not use the appliance near a heat source, on a hot 
surface, or in wet conditions. 

4.

 

To protect against electrical shock, do not immerse any part 
of the appliance in water or other liquid. 

5.

 

Unplug the appliance from the wall outlet when not in use 
and before cleaning. 

6.

 

Always unplug the device using the plug and never pull on 
the cord. 

7.

 

Do not operate the appliance if the cord or plug are 
damaged. 

8.

 

Do not operate the appliance if it malfunctions or is 
damaged.   

9.

 

Use this appliance for its intended use only. 

10.

 

Children should not use this appliance. When in use around 
children, close supervision by an adult is necessary and the 
appliance should be kept out of their reach.   

11.

 

This appliance is not intended for use by people with reduced 
physical, sensory or mental capabilities or who lack 
experience with cooking appliances.   

12.

 

Do not use an extension cord with this product. 

13.

 

Always use only food-grade, plastic pouches or pouch 
material, recommended by the manufacturer as suitable for 
cooking. Use only appropriately sized pouches and do not 
overfill the pouch.   

Summary of Contents for Chamber Vac Elite



























Reviews: