background image

 

„

 

Storage

 

 

In the following cases, contact the supplier for servicing. 

Do not service F12E-E yourself as this can be dangerous. 

* If the power lamp does not light when the power switch is in the ON position 
* If air is not blown when the fan speed varistor is turned 
* If the casing moves during use and air blow turns on and off 
* If the power cable is excessively hot 
* If the power supply adapter is excessively hot 
* If F12E-E emits strange noises or vibrates during use 
* If sparks are seen coming from electrode wire tips (In normal operation, sparks are not seen.) 
 

 CAUTION

     

STORAGE

 

 

PROHIBITED

 

Do not store F12E-E in the following places. 
Adverse environments can cause product breakdown. 
* Where exposed to vibrations or shock 
* Where temperature and humidity are outside specified ranges 
* Where dewing occurs 
* Where temperature fluctuates sharply 
* Where there is the possibility of ignition or explosion of flammable 
solvents, dust, etc. 
* Where there is heavy dust or smoke 
* Where possibly wet by water, oil, chemicals, etc. 
* Where strong electric or magnetic fields are generated

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

14 

Summary of Contents for STAT-CLEAN F12E-E

















Reviews: