2 9
■
Maintenance
2. CLEANING THE NEEDLE ELECTRODE
When the unit is used for a long period of time, dust or dirt adheres to the needle electrode, which
causes the deterioration of antistatic performance or dust/dirt dispersion. Brush the needle electrode
before using the unit.
Cleaning procedure
1) Turn the power switch to the OFF position to stop the operation.
2) Slide the brush installed on the unit to both ends to clean the needle electrode.
3. REPAIRING OR REPLACING THE NEEDLE ELECTRODE
If the cleaning brush becomes extremely dirty or the needle electrode is damaged, broken or bent, the
components must be replaced. For repair and replacement of the parts, contact the dealer where the product
was purchased.
CAUTION
CLEANING
If the electrode needles or front cover is dirty, it could lower the static erasing
performance or cause dust to fly around. Be sure to clean the contaminated
parts according to your service condition.
WARNING
PROHIBITED
If HV ask us to have it replace the electrode needle unit is broken or dropped
out, stop the operation and replace it with a new one. It can lead to an
electric shock or injury.
Summary of Contents for Stat Clean CF300-E
Page 5: ...2 1 External View ...
