Vessel IPC-A3, Instruction Manual

Page: 130 / 180

10
Operation
Operation
Switch
This is used to start and stop the unit.
When switched to [ ON ], the power is turned on, the switch LED lights up,
and operation starts.
When switched to [ OFF ], the power is turned off and operation stops.
Front acrylic window
Open and close the acrylic window according to the working conditions.
Please note that the best performance is obtained when the acrylic window is closed, so when
working with the window open, check to make sure of the air pressure suitable for the specific work.
CAUTION
Caution
Be careful not to get your finger caught when the front acryl window is opened
or closed.
Adhesive gel sheets
The adhesive gel sheets capture the dust blown off by the
ionizing nozzle.
The self-adhesive polyurethane gel sheets are attached to
stainless steel plates.
Remove the protective surface film before using the unit.
Refer to the maintenance section of this manual in regard
to the exchange procedure for the adhesive gel sheets.
CAUTION
Caution
If the adhesive gel sheets are deformed or broken while performing work,
continuing to use the product in this condition is hazardous, so make sure the
adhesive gel sheets are properly maintained.
Replacing deformed or damaged adhesive gel sheets is highly recommended.
Remember
This unit is designed for light work, such as handwork, so do not place heavy
objects on top of the adhesive gel sheets or forcefully strike it.
Doing so could deform or break the adhesive gel sheets.