background image

 

For Your Safely

 

Safety Precautions

 

●Carefully  read  these  Safety  Precautions  before  use. Observe the precautions  indicated  herein  to

 

ensure safety. 

Safety precautions in this instruction manual are categorized into two types by the degree of 

danger associated with each of the followings.

 

 

If the ionizers are used in a manner not specified by the manufacturer, the protection provided by 

the equipment may be impaired. 

Warning 

Indicates that improper handling can lead to serious injury or even death. 

Caution 

Indicates that improper handling can lead to minor injury and property 

damage. 

 

 

This symbol indicates a WARNING or CAUTION. 

 

This symbol indicates a prohibited action. 

 

This symbol indicates a mandatory required action 

 

Warning 

  PROHIBITED 

Do not use in environments with flammable gases and solvents in the 

atmosphere, requiring explosion-proof equipment. As this product is not 

explosion-proof, there is a risk of explosion or fire. 

  PROHIBITED 

Don't use this product for other purpose than static electricity elimination. 

 

Caution 

  PROHIBITED 

Don't bring this product into or don't use this product in a place where water, 

oil, solvent may be poured, and/or where corrosive gas such as acid, alkali, 

chlorine and so on. There is a risk of electric shock and/or product breakdown. 

  PROHIBITED 

Don't use this product in a place where a considerable shock and/or vibration 

are given, and/or where a sharp temperature fluctuation or dew condensation 

occurs. 

  PROHIBITED 

Be sure to use this product within a range of conditions of use in the section of 

Specifications" including the electric rating. Otherwise, there is a risk of fire and 

electric shock. 

  REMEMBER 

Installation and maintenance should be conducted by a person proficient in 

electric works including wiring. 

  REMEMBER 

If this product has broken considerably or gotten dilapidated, the electrical 

noises or burning in the high voltage part (i.e. transformer) may occur. 

Read this instruction manual attentively and perform a correct regular 

maintenance and inspection. 

  REMEMBER 

This product needs to be grounded. Don't use this product without being surely 

grounded. Otherwise, the product does not perform to the max extent as 

designed, and a user may feel a subtle electrical shock when he/she touches the 

housing. 

  REMEMBER 

Be sure to check the product when it was exposed to considerable shock or 

damage due to a drop or alike. If the product does not operate properly and/or 

any abnormal operation is detected, consult us for repair and/or replacement 

with a brand-new product. 

  REMEMBER 

Keep this instruction manual beside the product for a quick reference. 

Summary of Contents for HPG-1













Reviews: