VESPA LX 125 i.e. Manual Download

Page: 27 / 104

02_09

02_10

02_11

Keys (02_09, 02_10, 02_11)

The vehicle is supplied with two types of keys. The red-handgrip key «

» is the

MASTER

" key. Only a single copy of this key is supplied, which is necessary to pro-

gram all your other keys and for your dealer to perform some maintenance operations.
We therefore recommend that it be used only under exceptional circumstances. The
blue key «

» (single copy supplied) is used for normal operations and for start-up.

Together with the keys comes a CODE CARD which is imprinted with the mechanical
code of the keys.

WARNING

LOOSING THE RED KEY PREVENTS ANY REPAIRS OF THE 'PIAGGIO IMMO-
BILIZER' SYSTEM AND THE ENGINE CONTROL UNIT.

WARNING

KEEP THE 'CODE CARD' AND THE RED HANDGRIP KEY IN A SAFE PLACE (NOT
ON YOUR VEHICLE).

2 Vehicle

Summary of Contents for LX 125 i.e.









































































































Search results

Summary of Contents for LX 125 i.e.

Reviews:

Related manuals for LX 125 i.e.

Brands by name

Popular brands

VESPA LX 125 i.e., Manual

Search results

Summary of Contents for LX 125 i.e.

Reviews:

Related manuals for LX 125 i.e.

Brands by name

Popular brands