Vescent SLICE-DHV Quick Start Manual Download

Page: 19 / 20

2021/08/30 08:42

19/20

SLICE-DHV Dual-Channel High-Voltage Ampliﬁer

Product Manuals - https://www.vescent.com/manuals/

Fig. 27: User-programmable system settings

Screen Brightness and Volume Adjustment

From this screen, adjustments to the brightness of the screen and the volume of the audio feedback
can be made.

Input Impedance

Change the input impedance of the two front-panel input ports. Select either 50 Ω or 1 MΩ. For most
applications of the SLICE-DHV, a 1 MΩ impedance should be chosen.

SLICE Firmware

From time to time, Vescent will upgrade the ﬁrmware for controlling the SLICE-DCC. The procedure to

upgrade the SLICE-DHV ﬁrmware

is given here.

Using the PC Host GUI

Coming soon, please check back later.

Firmware Update

From time to time, Vescent will upgrade the ﬁrmware for controlling the SLICE-DCC. The procedure to
upgrade the ﬁrmware is given

here

Serial API

It is possible to control the SLICE-DHV through serial commands. Click here to access the

SLICE-DHV

Summary of Contents for SLICE-DHV





















Search results

Summary of Contents for SLICE-DHV

Reviews:

Related manuals for SLICE-DHV

Brands by name

Popular brands

Vescent SLICE-DHV, Quick Start Manual

Search results

Summary of Contents for SLICE-DHV

Reviews:

Related manuals for SLICE-DHV

Brands by name

Popular brands