Last update: 2021/08/26 14:26
slice:dhv
https://www.vescent.com/manuals/doku.php?id=slice:dhv
https://www.vescent.com/manuals/
Printed on 2021/08/30 08:42
Bias [V] field). By turning the right knob, it is possible to increase (cw) or decrease (ccw) the value of
the underlined digit. Turning the left knob will change which digit is editable (cw to move to the right
and ccw to move to the left). Changes made with the rotary knobs take effect immediately. Touch the
yellow-bordered field again to exit the edit mode.
Fig. 10: Knob adjustment of Bias Voltage set point for CH 1
Keypad
If you touch an editable field for a longer period of time (~3 s), a numeric keypad will appear as seen
in figure 11
. You can enter in the full value of the desired parameter with this keypad. Changes
entered through the keypad are not enacted until the Enter key is touched.
Fig. 11: Pop-up Keypad
The action initiated by each button of the keypad is described below.
Escape
