2019/08/21 02:55
5/12
Spectroscopy Module
Product Manuals - https://www.vescent.com/manuals/
Inputs, Outputs, and Controls
Input Connector (6-pin circular)
Never connect this device to its power supply when the
power supply is switched on and supplying power. Always
turn off the power supply, make connections to the device,
and then re-energize the power supply.
Power and temperature control signals from the D2-series power bus, the ICE-PB1, or other power
supply are made through a 6-pin circular connector (
). The pin definitions (pin
numbers are marked on the connectors) are listed below.
Fig. 3: Pin numbering on female Hirose 6-pin connector
Hirose
Pin
DB-9 Pin (if
applicable)
Input Voltage
Max Current
Draw
Notes
1
4 and 5
Signal Power
Ground
Return path for power rail.
2
8
-7 V to -15 V
100mA
See note below.
3
9
+7 V to +15 V
100 mA
See note below.
4
6 and 7
+5 V
1.5 A / 2.5 A
2.5 A max with Doppler
subtraction option, 1.5 A max
without.
5
No Connect
6
1 and 2
+5 V Ground
Return path for high current
+5V.
Tab. 3
Note: When powering the D2-210 with supplies other than a D2-005, pins 5 and 6 can be placed between 7-15 V. They
need not be symmetric, but both supply rails are always required.
See D2-005 manual for pin out on D-Sub 9-pin
connector.
Signal Output (SMA)
