Auto Configuration with Power-On Defaults
The “Auto Configuration with Power-On Defaults” loads the
settings detected when you turn on the computer. If your svstem
behaves erractically, you can use this feature to check for incorrect
settings.
From the following menu, highlight the feature from the main
menu and press <ENTER>.
B I O S SETUP PROGRAM AMI BIOS SETUP UTILITIES
(C) 1990 American Megatrends Inc., A l l Rights Reserved
Standard CMOS Setup
Advanced CMOS Setup
Auto Configuration With BIOS Defaults
Load Power-011 Default Values from ROM Table (Y/N)?
Load Power-On Default Values for Advanced CMOS and Chipset
ESC:Exit
Select F2/F9: Color F10:Save & Exit
Figure 9: Auto Configuration w/ Power-On Defaults
Hard Disk Utility
The “Hard Disk Utility” is basic drive setup software. All of the
options are destructive to data existing on a disk drive. The
options are used for low-level formatting before using the DOS
“FDISK” and “FORMAT”, or similiar utilities.
28
