![background image](http://html1.mh-extra.com/html/ves/colourfan-series/colourfan-series_installation-operation-and-maintenance-manual_1008642013.webp)
VES Andover Ltd Eagle Close Chandlers Ford Ind. Est Eastleigh Hampshire SO53 4NF
Tel: 08448 156060 Fax: 02380 261204 E-mail: [email protected] Web: www.ves.co.uk
Supply Unit
Installation, Operation and Maintenance Manual
13
ORIGINAL INSTRUCTIONS
®
Where a
colourfan
unit has been supplied with fitted controls, a cable gland or entry plate is
provided for ease of installation.
Where a membrane gland plate has been supplied, carefully pierce the desired entry point in
the plate with a small screw driver or similar Fig
20
. Note: when piercing the gland plate take
care not to damage the contents of the control panel. Feed the cable through the gland plate,
connect and provide appropriate cable restraint (wiring diagrams
page 8 - 12
).
A new entry point should be used for each additional cable entry.
Control panel
gland plate detail
Control panel
connection
This membrane gland plate is not suitable for use with traditional cable/armoured cable glands.
Should the installation require the use of such glands please make alternative provisions for the
cable entry to suit.
Important
Control panel
Entry plate detail
Where a cable entry plate has been supplied, carefully drill into the plate using an appropiatly
sized holesaw. Suitable cable glands should always be installed. Feed the cable through the cable
glands, connect and provide appropiate cable restraint (
wiring diagrams
page 8 - 12
)
. A new entry
point should be used for each cable entry.
Gland plate
cable entry
Cable entry plate
20
Fig.
Recommended
cable entry poin
t
21
Fig.
When drilling take extra care to not damage any control panel components. Always use a
drillstop and remove any swarf afterwards.
Continued
Standard Wiring
& Fan Installation
5