This is the property of Overview Limited, no copying without permission
except as permitted by copyright law
23 May 2013
11
Mounting the Dome unit
1.
Make sure the four M6 cap head screws are un-screwed so the heads of the screw are at least 5mm
above the top of the Dome unit.
2.
Align the four screws through the holes in the bracket and rotate the Dome so the screws move into
the slots in the bracket.
3.
Tighten up the M6 head screws with the socket driver provided.
4.
Push the plastic cover back down over the bracket.
M6 Cap Head
Screws
Fig 4
