Verve™ Living Systems
Installation Guide
Model: VOSC
Occupancy Sensor – Ceiling Mounted
Product Description
The Verve ceiling-mounted Occupancy Sensor saves energy and
adds convenience by accurately detecting when an area is
occupied or vacant.
It is a wireless, solar-powered sensor that detects occupancy
using passive infrared (PIR) heat and motion sensing. The sensor
transmits RF messages to Verve lighting, HVAC, and outlets to
use energy more efficiently.
Features Include:
•
Sends wireless messages to other devices whenever motion
is detected
•
Harvests ambient solar energy to power the sensor and
wireless communication
•
Mounts easily on any ceiling material
•
Works with other sensors for enhanced occupancy tracking
•
Built-in tests to confirm operation at installed location
•
Supplemental battery option for extreme low-light failover
Specifications
Planning
Take a moment to plan for the sensor’s successful operation and
optimal communication with other system components.
Remove the sensor from its packaging and place it in a strong
light to provide the required startup charge.
Tip:
To quickly ensure the sensor energy storage is fully charged,
insert a CR2032 battery for 30 seconds.
•
Ensure the location provides consistent and adequate light
•
Locate the sensor in the center of the room with an
unobstructed view of the space
•
Avoid installed near ceiling fan or hanging fixtures
•
Consider the area’s traffic patterns and principal use, for
example, walking, lounging or sleeping
•
Confirm a location is suitable by temporarily mounting the
sensor and testing it, see Walk Test and Light Test sections
•
Consider the construction materials in the space and
obstacles that may interfere with RF signals
Sensor Range
A single occupancy sensor provides sufficient coverage for most
applications.
Note:
For some applications, multiple sensors may be required
to provide complete coverage.
For detailed information, see the
Verve System Planning Guide
at www.vervelivingsystems.com.
Package Contents
• Occupancy Sensor
• 2 screws, 2 wall anchors
• Wire bracket
Tools Required
• Power drill, 3/16” bit
• Screwdriver
• Light meter
• Battery (CR2032) for
testing
6.3”
159.96mm
2.35”
59.57mm
1.47”
37.45mm
Summary of Contents for VOSC
Page 3: ......
